An AI chemistry tutor that sets up every problem

It writes out each setup on a whiteboard, one line at a time, then asks you for the next line.

Free plan with 50 credits a month. Add your materials once you're in.

  • 3,300+ learners
  • 15,000+ tutoring sessions
  • Cancel anytime
  • Nothing to install

The same lesson, written out

The tempting answers are that the weak acid needs less base and that every neutralization ends at pH 7. Both are wrong, and seeing why ties together moles, equilibrium and conjugate bases. On Sitor the tutor builds the answer in steps on the whiteboard and asks you to predict each one before it is written.

The question

You titrate 25.0 mL of 0.10 M HCl and 25.0 mL of 0.10 M acetic acid (Ka = 1.8 × 10⁻⁵) with 0.10 M NaOH. Which acid needs more NaOH to reach the equivalence point, and is the pH there 7 in both flasks?

Your turnCheck yourself: in the acetic acid titration, what is the pH after exactly 12.5 mL of NaOH has been added, and why does the answer not depend on the 0.10 M concentration?Show the answer

At 12.5 mL half of the acetic acid has been converted to acetate, so [CH₃COOH] = [CH₃COO⁻]. The Henderson-Hasselbalch equation gives pH = pKa + log(1) = pKa = 4.74. Only the ratio of acid to conjugate base matters, and at the half-equivalence point that ratio is 1 whatever the starting concentration.

  1. Count moles, not strength

    Each flask holds 0.0250 L × 0.10 mol/L = 0.0025 mol of acid. HCl and acetic acid each give up one H⁺ per molecule, so each flask can supply 0.0025 mol of H⁺ in total.

  2. What "weak" actually changes

    Strength is how much of the acid has ionized before any base is added. HCl is fully ionized, so [H⁺] = 0.10 M and the pH is 1.00. Acetic acid is only about 1.3% ionized: [H⁺] = √(1.8 × 10⁻⁵ × 0.10) = 1.3 × 10⁻³ M, so the pH is 2.87. The two curves start in different places.

  3. Why the weak acid still uses all of its base

    OH⁻ reacts with acetic acid molecules directly: CH₃COOH + OH⁻ → CH₃COO⁻ + H₂O. For this reaction K = Ka/Kw = 1.8 × 10⁹, so it goes essentially to completion. Every mole of acid consumes one mole of OH⁻, ionized or not. Both flasks need 0.0025 mol of NaOH, which is 25.0 mL.

  4. What is left in each flask

    At the equivalence point the HCl flask holds only Na⁺, Cl⁻ and water. Neither ion reacts with water, so the pH is 7.00 at 25 °C. The acetic acid flask holds 0.0025 mol of acetate, CH₃COO⁻, in 50.0 mL of solution, which is 0.050 M.

  5. Acetate is a weak base

    Acetate takes H⁺ back from water: CH₃COO⁻ + H₂O ⇌ CH₃COOH + OH⁻, with Kb = Kw/Ka = 5.6 × 10⁻¹⁰. Then [OH⁻] = √(5.6 × 10⁻¹⁰ × 0.050) = 5.3 × 10⁻⁶ M, pOH = 5.28 and pH = 8.72. Same volume of NaOH, but the equivalence point is basic.

  6. What this means for the indicator

    An indicator has to change color near the equivalence pH. Phenolphthalein, which changes between about pH 8.2 and 10, suits the acetic acid titration. Methyl orange, which changes between about pH 3.1 and 4.4, would change color long before the equivalence point.

What makes general chemistry hard, and how Sitor teaches it

Most points in general chemistry are lost on a handful of topics where a memorized rule gives the wrong answer as soon as the question changes. These six are the usual ones.

TopicWhere students lose pointsHow Sitor teaches it
Stoichiometry and limiting reagentsStudents compare grams instead of moles, or pick the reactant with fewer moles without dividing by its coefficient, and name the wrong limiting reagent.The board lays out the path grams → moles → mole ratio → grams and divides each reactant's moles by its coefficient. Then you are asked which runs out first when 10.0 g of H₂ reacts with 10.0 g of O₂ (it is O₂, with most of the hydrogen left over).
Lewis structures, VSEPR and polarityThe shape is read off the flat Lewis drawing, lone pairs are left out of the count, and any molecule with polar bonds is called polar.CH₄, NH₃ and H₂O are drawn side by side: four electron domains each, but shapes that are tetrahedral, trigonal pyramidal and bent. Then CO₂ and H₂O are compared and you decide in which one the bond dipoles cancel.
Thermochemistry and Hess's lawSign errors. Students believe that breaking bonds releases energy, forget to flip the sign of ΔH when an equation is reversed, or forget to scale ΔH when the coefficients are multiplied.An energy diagram is drawn with bond breaking as an arrow up and bond forming as an arrow down. Hess problems are solved by rearranging the given equations on the board until the unwanted species cancel, with ΔH adjusted on the same line as each change.
Equilibrium and Le Chatelier's principleEquilibrium is pictured as equal concentrations or as a reaction that has stopped. Students also expect a catalyst, extra solid, or an inert gas added at constant volume to shift it, and expect K to change with concentration.The tutor fills in an ICE table row by row, places Q and K on a number line to show which way the reaction runs, and asks after each change whether the position moved, K moved, or neither. Only a change in temperature changes K.
Acids, bases, buffers and pH"Strong" is confused with "concentrated", every equivalence point is assumed to be pH 7, and the Henderson-Hasselbalch equation is used where no buffer exists.A titration curve is drawn in four regions (start, buffer region, equivalence point, excess base), and at each one you list which species are in the flask before choosing an equation.
ElectrochemistryAnode and cathode are memorized as minus and plus, which flips between galvanic and electrolytic cells, and E° values are multiplied by the coefficients used to balance the electrons.A zinc-copper cell is drawn with electrons moving through the wire from Zn to Cu and ions moving through the salt bridge. Oxidation is fixed at the anode in every cell, and E°cell = E°cathode − E°anode is worked as 0.34 − (−0.76) = 1.10 V, with no scaling.

A three-week study plan for a general chemistry exam

A plan for a general chemistry midterm or final that covers four to six chapters. Tell Sitor your exam date and it builds this from your own syllabus; the shape stays the same.

  1. 3 weeks out

    Find the gaps

    • Upload the lecture slides and problem sets for every chapter on the exam.
    • Take the diagnostic, about five questions per chapter, and answer "not sure" honestly.
    • Check the foundations first: mole conversions, molar mass, balancing equations and molarity. Later chapters fail on step one without them.
  2. 2 weeks out

    Learn the setups

    • One topic a day on the whiteboard, in the order your exam covers them: limiting reagents, Lewis structures and VSEPR, Hess problems, ICE tables, buffers and titrations, rate laws from initial-rates data, cell potentials.
    • After each, solve one problem of that type on paper with the notes closed, then compare line by line.
    • For every equation, write down when it applies and when it does not. Do not move on from a topic until the tutor marks it mastered.
  3. 1 week out

    Practice like the exam

    • Ask for exam-style problems written from your slides, mixing chapters so you have to decide which method applies.
    • Work with only the periodic table and formula sheet your course allows, carry units through every line, and estimate the answer before you calculate.
    • Work any past papers your course has published, timed.
  4. The last two days

    Review, do not cram

    • Do the spaced reviews waiting on your Today page.
    • Redo the problems you got wrong from a blank page, without looking at the solution first.
    • Go over what the formula sheet will not give you, such as the strong acids and bases, solubility rules and common polyatomic ions. Then sleep.

Common mistakes when studying chemistry

Reading worked solutions instead of working problems
A solution you follow line by line feels like one you could have written. The exam gives you a blank page, so cover the solution, set the problem up yourself, and only then compare.
Memorizing equations without their conditions
The Henderson-Hasselbalch equation only describes a buffer. M₁V₁ = M₂V₂ is for dilution, and matches a titration only when acid and base react one to one. A rate law cannot be read from the coefficients of the balanced equation. Learn when each tool applies, not only its form.
Treating the mole as an early chapter that is finished
Equilibrium, titration, gas law and electrochemistry problems all begin with a mole conversion. If grams to moles to mole ratio is still slow, fix that first; it is the cheapest way to raise a score across every later chapter.
Learning trends and rules without the cause
Atomic radius shrinks across a period because effective nuclear charge rises while shielding stays about the same. Knowing the cause lets you handle the exceptions, such as why oxygen has a lower first ionization energy than nitrogen. The same holds for Le Chatelier: compare Q with K instead of reciting which way things shift.

Start free. Upgrade when it earns its place.

  • Free

    $0

    Monthly credits
    50/mo
    Learning topics
    Up to 10

    Enough to work through a few topics and see if it suits how you study.

  • Pro

    $19.90/mo

    First month $9.90, then $19.90/mo

    Monthly credits
    1,000/mo
    Learning topics
    Up to 500

    For exam season: the most credits plus deep research.

Start free

Questions about studying chemistry with an AI tutor

Can an AI tutor really teach college chemistry?

For the concepts and calculations of a first-year course, yes: they are well established, and an AI tutor can explain them, work examples and question you at any hour. Sitor does not replace your professor, your lab section or the past exams your course provides, and it is not an official question bank. Use it to understand the material and test yourself.

Does it work with my course, such as CHEM 101, CHEM 102 or AP Chemistry?

Yes. Upload the slides, notes or textbook chapters your course uses and Sitor builds the study plan and the practice questions from those pages, so the terms and scope match what you will be examined on. Without uploads it teaches from a standard general chemistry syllabus. For AP Chemistry, keep using the released exam questions alongside it.

What does teaching chemistry on a whiteboard look like?

The tutor writes and draws on a shared board as it speaks, one step at a time: a Lewis structure built up electron pair by electron pair, an ICE table filled in row by row, a titration curve drawn region by region. You can pause, ask about any step, and answer the questions it writes on the board. You can also switch to a text chat at any time.

How is this different from asking ChatGPT to solve a chemistry problem?

A chatbot answers the problem you paste in, and reading an answer is not the same as being able to set one up. Sitor starts with a diagnostic, plans the whole syllabus, teaches each topic step by step and stops to ask you for the next line. It keeps track of what you have mastered and brings topics back for review before you forget them.

Can it handle the math, such as stoichiometry, ICE tables and pH calculations?

Yes. Calculations are written out line by line on the whiteboard with units and the reason for each step, including mole conversions, limiting reagent problems, equilibrium and pH calculations, rate laws and cell potentials. The aim is that you can do the next problem yourself, so the tutor asks you to predict a step before it is written. You can also upload a photo of your own working and ask where it went wrong.

How much does it cost?

There is a free plan with 50 credits a month. A turn in the text chat starts at 1 credit and a turn on the whiteboard uses 10, so the free plan covers a short whiteboard lesson or a longer chat session. Starter is $9.90 a month and Pro is $19.90 a month, with a discount on the first month. You can cancel at any time.

Which part of chemistry are you studying?

Free plan with 50 credits a month. Add your materials once you're in.