An AI organic chemistry tutor that draws every arrow

It draws each mechanism on a whiteboard, one arrow at a time, then asks you to draw the next one yourself.

Free plan with 50 credits a month. Add your materials once you're in.

  • 3,300+ learners
  • 15,000+ tutoring sessions
  • Cancel anytime
  • Nothing to install

The same lesson, written out

This is a standard exam question because no memorized rule covers it: the substrate is the same in both flasks and the products are different. On Sitor the tutor builds the answer in steps on the whiteboard and asks you to predict each one before it is drawn.

The question

(R)-2-Bromobutane is split between two flasks. Flask A gets sodium cyanide (NaCN) in DMSO. Flask B gets sodium ethoxide (NaOCH₂CH₃) in ethanol with heat. What is the major product in each flask, and what happens to the stereocenter?

Your turnCheck yourself: flask B is repeated with 1-bromobutane in place of 2-bromobutane, with the same sodium ethoxide in ethanol. Is the major product an alkene or an ether?Show the answer

An ether. 1-Bromobutane is a primary halide, so the back of the carbon is open and SN2 is fast enough to beat E2 even with a strong base. The major product is 1-ethoxybutane, CH₃CH₂CH₂CH₂OCH₂CH₃, with a little 1-butene. "Strong base means elimination" is not a rule; it depends on how crowded the carbon is. Swap ethoxide for the bulky base potassium tert-butoxide and E2 wins again, because that base cannot reach the carbon.

  1. Read the substrate

    2-Bromobutane is CH₃CHBrCH₂CH₃, a secondary alkyl halide with a good leaving group (Br⁻). A tertiary halide would rule out SN2 and a methyl halide would allow nothing else, but a secondary carbon can react by SN2, SN1, E2 or E1. The substrate alone does not decide. The reagent does.

  2. Read the reagent

    Ask two separate questions: how good a nucleophile is it, and how strong a base? Cyanide (⁻CN) is a strong nucleophile but a weak base (the pKa of HCN is about 9). Ethoxide (CH₃CH₂O⁻) is a strong nucleophile and also a strong base (the pKa of ethanol is about 16). Both are strong, negatively charged reagents, so they attack the halide in a single bimolecular step faster than the C–Br bond can ionize by itself. SN1 and E1 are out in both flasks.

  3. Flask A: SN2 with inversion

    A strong nucleophile that is a weak base gives substitution. DMSO is polar aprotic: it does not hydrogen-bond to cyanide, so the anion stays reactive. The carbon of cyanide attacks C2 from the side opposite the bromine while bromide leaves, all in one step, and the other three groups flip over like an umbrella in the wind. The product is 2-methylbutanenitrile, CH₃CH₂CH(CN)CH₃, with inverted configuration: (S). The letter changes here because CN takes the top priority that Br had. Always reassign priorities instead of assuming R becomes S.

  4. Flask B: E2 beats SN2

    Ethoxide is a strong base as well as a nucleophile. Backside attack on a secondary carbon is crowded, a hydrogen on the neighboring carbon is easy to reach, and heat favors elimination. So the main pathway is E2: in one step the base removes a β-hydrogen, the C–H electrons become the C=C π bond, and bromide leaves. A smaller amount of the SN2 ether, 2-ethoxybutane, forms alongside.

  5. Which alkene

    There are β-hydrogens on C1 and on C3. Removing one from C1 gives 1-butene (monosubstituted). Removing one from C3 gives 2-butene (disubstituted). A small base such as ethoxide gives mainly the more substituted, more stable alkene (the Zaitsev product). E2 also needs the H and the Br anti-periplanar, 180° apart. The conformation that meets this with the two CH₃ groups anti to each other is lower in energy than the one with them gauche, and it leads to the trans alkene. Major product: trans-2-butene, also named (E)-2-butene.

  6. What happened to the stereocenter

    In flask A the stereocenter survives and is inverted: one enantiomer in, one enantiomer out. In flask B it is gone. C2 becomes an sp² carbon of the double bond, and trans-2-butene is achiral. Starting from (S)-2-bromobutane would give the mirror-image nitrile in flask A and exactly the same alkene in flask B.

What makes organic chemistry hard, and how Sitor teaches it

Organic chemistry is cumulative. A small set of ideas from the first weeks is reused in every later chapter, and most points are lost where a student memorized an outcome instead of the reason for it. These six topics are where that shows most.

TopicWhere students lose pointsHow Sitor teaches it
Curved arrows and resonanceStudents start arrows at atoms or at positive charges instead of at electron pairs, and picture resonance structures as separate molecules flipping back and forth.Each arrow is drawn one at a time from a lone pair or a bond to where the electrons end up, and formal charges are recounted after every arrow. You then draw the contributors of an allyl cation and an enolate yourself and say which one contributes most.
Acid-base reactions and pKaA pKa table is memorized, but students cannot say which way an equilibrium lies, because they look at the acid instead of the stability of its conjugate base.Both conjugate bases are drawn side by side and compared by atom, resonance, induction and orbital. Then you decide a real case: hydroxide cannot deprotonate a terminal alkyne (pKa about 25, against about 16 for water), while amide ion (ammonia, pKa about 38) can.
Stereochemistry: chirality, R/S and meso compoundsR and S are assigned with the lowest-priority group pointing at the viewer, any molecule with stereocenters is called chiral, and R/S is confused with the direction of optical rotation.Priorities are numbered on the board and the lowest group is put in back, or the answer is reversed when it is in front. Pairs of structures are then compared one stereocenter at a time and you label them identical, enantiomers, diastereomers or meso.
SN1, SN2, E1 and E2 competitionStudents use a flowchart based on the substrate alone and ignore whether the reagent is a strong base, a bulky base or only a good nucleophile, so secondary halides go wrong.A three-column table (substrate, reagent, solvent) is filled in on the board before any arrow is drawn. The mechanism is then drawn with wedges and dashes, so inversion, loss of the stereocenter or the alkene geometry can be seen.
Carbonyl chemistryAcetal formation, imine formation, Grignard addition and ester hydrolysis are memorized as unrelated reactions, so a carbonyl compound that was not on the list is a blank.The same two moves are drawn each time: a nucleophile attacks the δ⁺ carbonyl carbon to give a tetrahedral intermediate, then the intermediate is either protonated or expels a leaving group. You are asked why a Grignard reagent adds once to a ketone but twice to an ester.
Multistep synthesis and retrosynthesisStudents work forward from the starting material by trial and error, and forget that the order of the steps changes the product.The board starts at the target and asks which bond was made last, one step back at a time. Example: meta-bromonitrobenzene from benzene needs nitration before bromination, because a nitro group directs meta while bromine directs ortho and para.

A three-week study plan for an organic chemistry exam

A plan for an Orgo midterm or final that covers four to six chapters. Tell Sitor your exam date and it builds this from your own syllabus; the shape stays the same.

  1. 3 weeks out

    Find the gaps, foundations first

    • Upload the lecture slides and notes for every chapter on the exam.
    • Take the diagnostic and answer "not sure" honestly, including on curved arrows, formal charges and pKa comparisons.
    • If the foundations are shaky, let the plan put them ahead of any reaction chapter. Every later mechanism depends on them.
  2. 2 weeks out

    Learn mechanisms, not reactions

    • One mechanism family a day on the whiteboard: substitution and elimination, additions to alkenes, carbonyl additions, electrophilic aromatic substitution, whichever your exam covers.
    • After each session, redraw the mechanism on a blank page: every arrow, every intermediate, every formal charge. Then compare.
    • Build a one-page reaction sheet grouped by mechanism type instead of by chapter, with a column each for reagent, regiochemistry and stereochemistry.
  3. 1 week out

    Practice like the exam

    • Ask for mixed problems written from your materials: predict the product, draw the mechanism, propose a synthesis.
    • Do a few multistep synthesis problems every day, working backward from the target.
    • Work spectroscopy problems in a fixed order: degrees of unsaturation, IR functional groups, then NMR signals, integration and splitting.
    • Work any past exams your professor has released, timed and on paper.
  4. The last two days

    Review, do not cram

    • Do the spaced reviews waiting on your Today page.
    • Redraw your three weakest mechanisms from a blank page and say the reason for each arrow out loud.
    • Stop adding new reactions and sleep. An Orgo exam is problem solving, and problem solving is the first thing to go when you are tired.

Common mistakes when studying organic chemistry

Memorizing reagent-to-product flashcards
The list of reactions grows every week and a deck of cards cannot keep up. Most of those reactions are a few mechanism patterns repeated. Learn the pattern, and a product you have never seen can still be worked out.
Reading mechanisms instead of drawing them
Following the arrows in an answer key feels like understanding. The exam gives you a blank page, so practice on a blank page with a pencil, and check the key only after you have committed to an answer.
Leaving stereochemistry and regiochemistry off the product
A product with the right atoms and missing or wrong wedges loses points. For every reaction ask two questions: which carbon gets the new group, and from which face does it arrive?
Carrying weak foundations into later chapters
Acid-base reasoning, resonance and arrow pushing from the first weeks are used in every mechanism afterward. If carbonyl chemistry feels impossible, the gap is often back there, and an hour spent on pKa and resonance repays itself.

Start free. Upgrade when it earns its place.

  • Free

    $0

    Monthly credits
    50/mo
    Learning topics
    Up to 10

    Enough to work through a few topics and see if it suits how you study.

  • Pro

    $19.90/mo

    First month $9.90, then $19.90/mo

    Monthly credits
    1,000/mo
    Learning topics
    Up to 500

    For exam season: the most credits plus deep research.

Start free

Questions about studying organic chemistry with an AI tutor

Can an AI tutor really teach organic chemistry?

For the mechanisms and concepts of a two-semester sequence, yes: this chemistry is well established, and an AI tutor can draw it, explain it and question you on it at any hour. Sitor does not replace your professor or your lab section, and it is not an official question bank. Use it to understand mechanisms and test yourself, and keep working the past exams your course provides.

Does it work with my course, such as Organic Chemistry I, Organic Chemistry II or a pre-med Orgo sequence like CHEM 231/232?

Yes. Orgo courses differ in the order of topics and in which reagents they expect you to know, so upload the slides, notes or textbook chapters your course uses. Sitor builds the study plan and the practice questions from those pages and cites the page each question comes from. Without uploads it teaches from a standard Organic Chemistry I and II syllabus.

How is this different from asking ChatGPT to explain a reaction?

A chatbot answers the question you ask. Sitor starts with a diagnostic, plans the whole syllabus, and teaches each mechanism step by step on a whiteboard. It asks you to predict the next arrow instead of only showing it, keeps track of what you have mastered, and brings topics back for review before you forget them.

Can it draw mechanisms and help with synthesis problems?

Yes. Mechanisms are drawn on the whiteboard one curved arrow at a time, with the intermediates and formal charges, and you can pause at any arrow and ask why the electrons move that way. For synthesis the tutor works backward from the target with you and asks you to propose each step before it shows one. Two honest limits: watching a mechanism is not the same as drawing it, so redraw each one on paper yourself, and a flat board does not replace a molecular model kit when you need to see a chair or a stereocenter in three dimensions.

Can it help with IR and NMR spectroscopy problems?

Yes. The tutor teaches one order of attack and has you practice it: degrees of unsaturation from the molecular formula, functional groups from the IR spectrum (a strong absorption near 1700 cm⁻¹ for C=O, a broad one around 3300 cm⁻¹ for O–H), then the ¹H NMR spectrum by number of signals, integration, chemical shift and splitting. You propose a structure and check it against every signal.

How much does it cost?

There is a free plan with 50 credits a month. A turn in the text chat starts at 1 credit and a turn on the whiteboard uses 10, so the free plan covers a short whiteboard lesson or a longer chat session. Starter is $9.90 a month and Pro is $19.90 a month, with a discount on the first month. You can cancel at any time.

Which part of organic chemistry are you studying?

Free plan with 50 credits a month. Add your materials once you're in.